Retro-Fit Boards
This innovative board design offers a perfect solution for covering existing boards or when wanting to avoid the labor intensive alternative of adhering skins to the existing surface. Retro-Fit boards fit easily over previously installed framed boards without removing them. Installation can be done in minutes.
Product Details
-
Magnetic porcelain enameled steel surface -
1” aluminum trim face - 1/4” MDF with mylar backer
- To determine height, measure from the top of the existing board to the top of the existing tray
- To determine width, measure from the outside edge of the left side of existing board to the outside edge of the right side
Product Dimensions
| Size (h x w) | Weight | Item # | |||
|---|---|---|---|---|---|
 | |||||
| up to 4' 3/8" | up to 4' 3/8" | 37 lbs | 37 lbs | RF-404 | RF-404 |
| 4' 1/2" to 6' 3/8" | 4' 1/2" to 6' 3/8" | 57 lbs | 57 lbs | RF-406 | RF-406 |
| 6’ 1/2” to 8’ 3/8” | 6’ 1/2” to 8’ 3/8” | 74 lbs | 74 lbs | RF-408 | RF-408 |
| 8’ 1/2” to 10’ 3/8” | 8’ 1/2” to 10’ 3/8” | 99 lbs | 99 lbs | RF-410 | RF-410 |
| 10’ 1/2” to 12’ 3/8” | 10’ 1/2” to 12’ 3/8” | 129 lbs | 129 lbs | RF-412 | RF-412 |
| 12’ 1/2” to 16’ 3/8” | 12’ 1/2” to 16’ 3/8” | 161 lbs | 161 lbs | RF-416 | RF-416 |
